View MC-7884_5041747.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
GaAs MULTI-CHIP MODULE
MC-7884
870 MHz CATV 25 dB POWER DOUBLER AMPLIFIER
DESCRIPTION
The MC-7884 is a GaAs Multi-chip Module designed for use in CATV applications up to 870 MHz. This unit has low distortion, low noise figure and return loss across the entire frequency band. Reliability and performance uniformity are assured by our stringent quality and control procedures.
FEATURES
* Low distortion * High linear gain * Low return loss GL = 25.0 dB MIN. @ f = 870 MHz
ORDERING INFORMATION
Part Number MC-7884 Package 7-pin special with heatsink 50 pcs MAX./Tray Supplying Form
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: MC-7884
ABSOLUTE MAXIMUM RATINGS (TA = +25C)
Parameter Supply Voltage Input Voltage
Note
Symbol VDD Vi TC Tstg
Ratings 30 65.0 -30 to +100 -40 to +100
Unit V dBmV C C
Operating Case Temperature Storage Temperature
Note In case of single tone
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information.
Document No. PG10316EJ01V0DS (1st edition) Date Published January 2003 CP(K) Printed in Japan
(c) NEC Compound Semiconductor Devices 2002, 2003
MC-7884
RECOMMENDED OPERATING CONDITIONS (ZS = ZL = 75 )
Parameter Supply Voltage Input Voltage Symbol VDD Vi 110 channel, 10 dB tilted across the band Test Conditions MIN. 23.5 - -30 TYP. 24.0 29.0 MAX. 24.5 32.0 Unit V dBmV C
Operating Case Temperature
TC
+25
+85
ELECTRICAL CHARACTERISTICS (TC = 305C, VDD = 24 V, ZS = ZL = 75 )
Parameter Linear Gain Gain Slope Gain Flatness Noise Figure 1 Noise Figure 2 Operating Current Composite Triple Beat Cross Modulation Composite 2nd Order Beat Input Return Loss 1 Input Return Loss 2 Input Return Loss 3 Input Return Loss 4 Output Return Loss 1 Output Return Loss 2 Output Return Loss 3 Output Return Loss 4 Symbol GL GSlope GFlatness NF1 NF2 IDD CTB XM CSO RLi1 RLi2 RLi3 RLi4 RLo1 RLo2 RLo3 RLo4 Test Conditions f = 870 MHz f = 40 to 870 MHz f = 40 to 870 MHz, Peak to valley f = 50 MHz f = 870 MHz RF OFF 110 channel, VO = 52 dBmV at 745.25 MHz, 10 dB tilted across the band f = 40 to 160 MHz f = 160 to 320 MHz f = 320 to 640 MHz f = 640 to 870 MHz f = 40 to 160 MHz f = 160 to 320 MHz f = 320 to 640 MHz f = 640 to 870 MHz MIN. 25.0 1.0 - - - 310 - - - 20 20 19 17 20 20 19 18 TYP. - 1.4 - - - - - - - - - - - - - - - MAX. 26.0 1.8 0.6 5.0 5.5 360 -60 -55 -63 - - - - - - - - Unit dB dB dB dB dB mA dBc dBc dBc dB dB dB dB dB dB dB dB
2
Data Sheet PG10316EJ01V0DS
MC-7884
PACKAGE DIMENSIONS 7-PIN SPECIAL WITH HEATSINK (UNIT: mm)
45.08 MAX.
3.2 MAX.
38.10.25
8.1 MAX.
4.25-0.35
+0.25
27.5 MAX.
14.85 MAX.
19.050.38
25.40.25 6-32UNC2B 2.540.25 0.510.05
4.00.25
21.5 MAX.
4.190.13
123
5
789
A 6.3 0.510.05 0.38.. A 0.05 2.5
12.9 MAX.
2.620.35
2.540.38
PIN CONNECTION
VDD 5
1 IN
9 OUT
2
3
7
8 GND
10.750.25
Data Sheet PG10316EJ01V0DS
3
MC-7884
NOTES ON CORRECT USE
(1) The space between PC board and root of the lead should be kept more than 1 mm to prevent undesired stress to the lead and also should be kept less than 4 mm to prevent undesired parasitic inductance. Recommended that space is 2.0 to 3.0 mm typical. (2) Recommended torque strength of the screw is 59 to 78 Ncm. (3) Form the ground pattern as wide as possible to minimize ground impedance. (to prevent undesired oscillation) All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Partial Heating Soldering Conditions Peak temperature (pin temperature) : 350C or below Soldering time (per pin of device)
Note
For soldering
Recommended Condition Symbol -
: 3 seconds or less
Note The point of pin part heating must be kept more than 1.2 mm distance from the root of lead.
4
Data Sheet PG10316EJ01V0DS
MC-7884
* The information in this document is current as of January, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4 - 0110
Data Sheet PG10316EJ01V0DS
5
MC-7884
SAFETY INFORMATION ON THIS PRODUCT
Caution
GaAs Products The product contains gallium arsenide, GaAs. GaAs vapor and powder are hazardous to human health if inhaled or ingested. * Do not destroy or burn the product. * Do not cut or cleave off any part of the product. * Do not crush or chemically dissolve the product. * Do not put the product in the mouth. Follow related laws and ordinances for disposal. The product should be excluded from general industrial waste or household garbage.
Business issue NEC Compound Semiconductor Devices, Ltd. 5th Sales Group, Sales Division TEL: +81-3-3798-6372 FAX: +81-3-3798-6783 E-mail: salesinfo@csd-nec.com NEC Compound Semiconductor Devices Hong Kong Limited Hong Kong Head Office FAX: +852-3107-7309 TEL: +852-3107-7303 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office FAX: +82-2-528-0302 TEL: +82-2-528-0301 NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-01 FAX: +49-211-6503-487 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Technical issue NEC Compound Semiconductor Devices, Ltd. http://www.csd-nec.com/ Sales Engineering Group, Sales Division E-mail: techinfo@csd-nec.com FAX: +81-44-435-1918
0209

▲Up To Search▲

Price & Availability of MC-7884

	To Download MC-7884 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .